bully

All posts tagged bully

Good evening friends. We have seen how to perform dictionary password cracking on WPA/WPA2 wifi networks using both aircrack and Fern Wifi Cracker. Today we will see WPA/WPA2 password cracking with a tool called Bully which is inbuilt in Kali Linux. We will do this by cracking WPS pin. WPS stands for Wifi Protected Setup. It is a standard for easy and secure wireless network set up and connections and the pin is encoded on the Wifi router.  As always brute forcing password attack consumes lot of time. It took me 6 hours 37 mins to crack this pin. So please have lots and lots of patience. Let’s start.

First let’s see our  wireless interfaces. Open Terminal and type  command “iwconfig.

wpacrack1

Let’s place our wireless interface in monitor mode. Monitor mode is same as promiscuous mode in wired sniffing. Type command “airmon-ng start wlan0″. We can see below that monitor mode has been enabled on “mon0″.

wpacrack2

Open a new terminal and type command “airodump-ng mon0″ and hit Enter.

wpacrack3

 

We can see all the wireless networks available as shown below.Look for a WPA/WPA2 enabled network.

wpacrack4

 

Copy the MAC address of the wifi network whose password you want to crack. For this howto I will crack the password of wifi network “shunya”. Open Terminal and type command “bully -b <MAC address> -c 13 -B mon0″ and hit Enter.

<MAC address> is the MAC address of the Wifi network.

-c is the channel our wifi network is running on,

-B = bruteforcing.

bully5

We can see that the tool bully will try different pins to crack the password. After a long time( as I already told you) the tool will give out the current pin and the password of the wifi network as shown below.

bully6

Hope this was helpful.