All posts tagged Shareware

Understanding subnetting is very important not only for those preparing for CCNA exam but also network administrators. Today, I am going to teach you how to create a subnet in a network. For this, I will use Packet Tracer software. To know what is subnetting and why we need it go here. So let’s start.

Imagine I formed a small software company named shunya whose network looks like below. I hired one Java developer, one software tester, one HR and one network administrator. I have been assigned the IP address range from to



I have enabled DHCP on my router as below.




After one year, imagine my company has received Abrahamic blessings from GOD and has seen rapid growth. Now the company has three Java developers, three software testers and  a dedicated HR team. Not only that, my company now has moved into Remote Infrastructure Management(RIM) and has a Network Operation Center(NOC) and Security Operation Center(SOC).  Total I have 15 computers in my network which looks like below.



Now see the image below. Here the machine “JD1″ sends a packet to machine “Testing3″. We can see here that for communication between machines “JD1: and “Testing3″ other machines have also been disturbed.



So for this reason, I decided to subnet the network. I decide to divide the network into three subnets as shown below.



To create a subnet, first we need to have proper planning as to how many subnets we need and how many we may need in the future. Presently, I need three subnets. The number of subnets should always be calcutated in the powers of 2.

2 to the power of 1 = 2

This doesn’t satisfy our requirement as we need three subnets.

2 to the power of 2 = 4

This satisfies our requirement. So we need to take two bits from the host portion of the IP address. to is the address range available to us with subnet mask,  Writing the subnet mask in the binary notation, it is

11111111 11111111 11111111 00000000

 255            255          255             0  

The first 24 bits are network bits and the last eight bits are host bits. To create three subnets, we need to take two bits from the host portion of the address as explained above.

11111111 111111111 11111111 11000000

   255              255            255         192

Four subnets which can be created from the above subnet mask are, to ( with host bits 00000000 ) to ( with host bits 01000000 ) to ( with host bits 10000000 ) to ( with host bits 11000000 )

Since we require only three subnets, we will create the first three subnets. The first subnet ( to ) comprises of Java Developers and Software testers. The commands are as below on the interface.



If you go to any machine on this subnet and look at its IP address, it will be like below.


Now the subnet for the Human Resource Department ( to ) . This will be like below.






The third subnet ( to ) comprises of NOC and SOC.







Now our network has been successfully subnetted into three subnets and we still have another subnet to use for future use.




Hope this was helpful. If you have any doubts regarding this article please comment below. Thank you.